Compressive Strength (@28days)
> 15 Mpa
Package
40 Kg/Bag
Colour
Grey
Water powder ratio (For Mixing purpose)
Shree E Tile Bond+ is a premium quality readymix adhesive that is specially formulated for fixing ceramic tiles and porous stones on walls and floors. The adhesive is known for its excellent bonding strength, durability, and resistance to water and chemicals. It is a versatile adhesive that can be used for both interior and exterior applications.
The unique formulation of Shree E Tile Bond+ ensures that the adhesive sets quickly, allowing for fast installation of tiles and stones. The adhesive has a creamy texture that makes it easy to apply and spread evenly. It is also highly workable, which means that it can be used for a variety of applications, including fixing tiles on uneven surfaces.
Readymix Adhesive for fixing ceramic files, porous stones for walls/floors
The Readymix Adhesive for fixing ceramic tiles and porous stones is a high-quality adhesive that is designed to use on walls and floors. It is a readymix adhesive, which means that it is pre-mixed and ready to use. The adhesive is suitable for fixing a wide range of ceramic tiles and porous stones, including those that are difficult to fix with traditional adhesives.
The Readymix Adhesive has excellent bonding strength, which means that it can hold the tiles and stones firmly in place. It is also highly resistant to water and chemicals, which makes it suitable for use in wet areas such as bathrooms and kitchens.
Readymix Adhesive for fixing dado tiles
The Readymix Adhesive for fixing dado tiles is a high-quality adhesive that is specially formulated for use on walls. It is a readymix adhesive, which means that it is pre-mixed and ready to use. The adhesive is suitable for fixing a wide range of dado tiles, including those that are difficult to fix with traditional adhesives.
The Readymix Adhesive has excellent bonding strength, which means that it can hold the tiles firmly in place. It is also highly resistant to water and chemicals, which makes it suitable for use in wet areas such as bathrooms and kitchens.
Ceramic Tiles adhesive
Ceramic Tiles adhesive is a premium quality adhesive that is designed for fixing ceramic tiles on walls and floors. It is a versatile adhesive that can be used for both interior and exterior applications. The adhesive is known for its excellent bonding strength, durability, and resistance to water and chemicals.
The Ceramic Tiles adhesive has a smooth and creamy texture, which makes it easy to apply and spread evenly. It is highly workable, which means that it can be used for a variety of applications, including fixing tiles on uneven surfaces.
Adhesive for fixing Ceramic tiles above kitchen platform
The Adhesive for fixing Ceramic tiles above the kitchen platform is a high-quality adhesive that is specially formulated for use in kitchens. It is a versatile adhesive that can be used for fixing ceramic tiles on walls and floors. The adhesive is known for its excellent bonding strength, durability, and resistance to water and chemicals.
The Adhesive has a smooth and creamy texture, which makes it easy to apply and spread evenly. It is highly workable, which means that it can be used for a variety of applications, including fixing tiles on uneven surfaces. The adhesive is also highly resistant to heat, making it ideal for use in areas where there is a high temperature.
Tile Mortar (Adhesive)
Tile Pasting Mortar is a premium quality adhesive that is designed for fixing tiles on walls and floors. It is a versatile adhesive that can be used for both interior and exterior applications. The adhesive is known for its excellent bonding strength, durability, and resistance to water and chemicals.
The Tile Pasting Mortar has a smooth and creamy texture, which makes it easy to apply and spread evenly.
Description
Single component, Polymer modified tile adhesive with High Strength and Hydrophobic property (manufactured as per IS 15477:2019:Type-I (Standard))
BIS Reference: IS15477:2019 Adhesives for use with Ceramic, Mosaic and Stone Tiles - Specification
AREA OF APPLICATIONS
For fixing Ceramic tiles on floors/ walls, directly on masonary, on internal/ External walls of bathroom/ toilet/ Pantry/ wash basin/ Kitchens/ Balcony/ wet area in all residential / Commercial / Industrial / Institutional / Malls / Multiplex / Hotels / Hospitals projects / Govt & Semi Government Projects, Railways, CIDCO/ PWD /CPWD, MHADA, MCGM Projects, SRA, Affordable housing projects, Religious Places, Heritage Structures and various types of Projects.
Fixing Wall Tiles
For fixing ceramic tiles on bathroom wall water proofing surface
Fixing Floor Tiles
For fixing Ceramic Tiles on Floors
Fixing Kitchen Tiles
For fixing Ceramic Tiles above kitchen platform
Fixing Bathroom Tiles
For fixing ceramic tile on plaster wall surface
Advantages
High bonding and Compressive strength than conventional fixing material & methods.
Pot life is more hence tile fixing work can be continue for long time from the mixed material without any wastage.
Adjust ability time is more hence tile can adjust upto 30 min after application.
Excellent slip resistance.
Uniform and Consistency in Quality, Pre blended in factory with quality control by regular testing of raw materials and finish goods.
Excellent Adhesion to Cement based backgrounds (substrates) like Cement Plasters, R.C.C renders, Cement Concrete as well as, A.A.C/ Concrete block/ Brick masonry, and other substrates.
Only need to add "Shree E- Tile Bond+" powder in water as per water powder ratio at site during the application hence, Quality can be control at any location.
Use of "Shree E- Tile Bond+" for fixing tiles reduce the time, it gains more strength in lesser time hence early completion of the balance work which saves the cost of the interest, finally saving in the cost of the Project.
Fixing of tiles with "Shree E- Tile Bond+" saves material, water for mixing and curing ultimately it saves cost, time and lot of natural resources hence its Eco friendly Green building material.
Easy availability and quick delivery of "Shree E-Tile Bond+" avoids more investment to keep the stock.
"Shree E-Tile Bond+" has hydro phobic property hence it avoids the water penetration.
Use of "Shree E-Tile Bond+" saves the cost of the labour, avoids wastage, Easy accountability/ traceability of material consumed and balance as well as keeps the site neat and clean.
Applications
Technical details
To Know More About Technical Specification In Detail
How To Use
Do not use or mix any other material in "Shree E- Tile Bond+" except water, Add “Shree E- Tile Bond+” powder, in clean water 200-220 ML/Kg, Incase of hand mixing, it shall be mix for 8 to 10 min. Incase of mechanical mixer add "Shree E-Tile Bond+" powder, in 180-200 ML/ Kg water & mix for 3 min. Accordingly for the bag of 40Kg of "Shree E-Tile Bond+" water shall be added as per type of mixing. After addition of "Shree E- Tile Bond+ powder" in water, mix it thoroughly in mixing trey/ Pot/ or in case of use of mechanical mixer/ Stirrer till we get uniform consistency, allow mixed material remain idle for 3 to 5 minutes for additives/ Polymers to dissolved to get the required special properties to the tile adhesive.
Ceramic Tiles/ Pores Stone tiles for flooring can be fixed with“Shree E Tile Bond+”by levelling the floor surface either by using Shree E Bed Mortar+ (on next day) or by using Screed (Cement Mortar1:4) (after curing, cleaning & drying the surface) Surface shall be clean, dust free as well as free from curing compound, It shall be wet before application. Incase of smooth surface, if required it shall be made rough by proper equipment to get proper grip/ bonding, rough surface shall be made clean, dust free and wet before fixing the tiles.
Tiles shall be immersed in the water before fixing more than half an hour earlier, it shall be removed from the water & surface shall be dried/ clean, tile adhesive shall be mix again and applied in 2 to 3MM thickness on walls well as on back surface of tile by spreading uniformly by using notch trowel to get uniform thickness, proper bonding between tiles and wall /floors surface as well as to remove excess material, tap gently on tile with wooden or rubber mallet, remove excess material by wet/ damp cloth or sponge after checking alignment of tiles, same procedure shall be followed, while fixing the next tiles, Joints between two tiles shall be cleaned for filling with Shree E-Tile Grout + / or any other Grout on the next day. Due to addition of chemicals/ special adhesive while manufacturing tile adhesive, no need of curing. Walking on tile shall be allowed after 24 hrs.
In case of manual mixing hand gloves shall be used.
"Shree E - Tile Bond+" contains non-toxic materials. In case of contact with body, eye & face wash it with sufficient water.
Unloading and Storage
Do Not Use Hook
Do not use hook for unloading, shifting of bags, material
Loaded Above Ground Level
It shall be unloaded on uniform level platform surface above ground level with proper stacking in countable manner
Store In Dry Place
It should be stored in covered dry place.In case of rainy season it shall be stored in closed store room by covering it by tarpaulin / polythene sheet to protect the bags from dampness / humidity in the atmosphere.
