Compressive Strength (@28days)
> 30 N/ Mm2
Package
30 Kg/Bag
Colour
Grey /White / Colour
Shelf Life
Water powder ratio (For Mixing purpose)
Shree E Plast+ FC EF are innovative products from Shree Premix Industries (SPI), designed to address the issue of honeycombing surface and uneven surface in minimum thickness. These products are specially formulated with a unique combination of cement, additives, and fibers to provide superior performance in a variety of construction applications.
SPI is a leading manufacturer of construction chemicals special repairing mortar for precast products based in India. With a commitment to innovation and excellence, the company has developed a range of high-quality products that meet the needs of the construction industry.
One of the key challenges faced by construction professionals is the problem of honeycombing surface and uneven surface in minimum thickness. These issues can occur when concrete is not properly compacted, leading to air pockets and other imperfections in the finished product. This can compromise the structural integrity of the building and reduce its overall lifespan.
To address this issue, SPI has developed Shree E Plast+ FC EF product is specially designed to fill in gaps and voids in concrete surfaces, providing a smooth and even finish. They are ideal for use in a variety of applications, including repairing precast concrete members, hollow sections, and Hume pipes.
In addition to these products, SPI also offers Readymix Mortar for filling Pin holes. This product is designed to fill small holes and cracks in concrete surfaces, providing a strong and durable repair solution. It is easy to apply and dries quickly, making it ideal for use in time-sensitive construction projects. It is best for repairing uneven bottom surface of ceiling, water tanks & other concrete members
For larger repairs, SPI offers Readymix Coat for levelling and finishing Precast members. This product is specially formulated to provide a smooth and even finish on precast concrete surfaces, reducing the need for costly and time-consuming sanding and grinding. It is easy to apply and dries quickly, making it ideal for use in a variety of construction applications.
Overall, SPI is committed to providing innovative and high-quality products that meet the needs of the construction industry. Whether you are looking for a solution to honeycombing surface and uneven surface, or need a reliable product for filling pin holes and repairing damage precast concrete members, SPI has the products you need to get the job done right.
Description
Single component, Pre blended, Polymer modified, Cement base, High Strength, Hydrophobic property, Non Shrink, Multi-Purpose ready to use material for levelling and Finishing the R C C surfaces, A.A.C Block /Concrete Block /Brick & various types of substrate in minimum thicknesses.
BIS Reference: IS-2402-1963 (Reaffirmed2022) : Code of Practice for external rendered finishes shall be followed for specifications, number of coats, thickness of plaster and other.
AREA OF APPLICATIONS
For leveling, Finishing, Uneven External, Internal surfaces of Mivan/ AL Shuttering of RCC walls. For leveling uneven surfaces of Ceiling/ all types of R.C.C beams/ Columns/ Chajjas/ Basements/ Retaining walls/ tanks. Replacement to exterior surface finishing material in all types Residential/ Commercials/ Industrial/ Institutional Buildings, Malls, Multiplex, Public Buildings, Hotel, Hospitals, Government, Semi government Projects, Metro / Mono rail projects / Railway, PWD, CPWD, MHADA, CIDCO, MCGM Project Pantpradhan Avas Yojna, Swatch Bharat Abhiyan Projects, SRA Projects, Redevelopment Projects, Affordable Housing Projects, Religious Projects, Heritage structure projects,Ware housing projects and various types of projects.
Filling Pin holes, Levelling, Finishing Unceven R C C surface
Levelling of Mivan shuttering RCC surface with "Shree E Plast+ (FC) EF"
Levelling & Finishing RCC beam Bottom Surface with "Shree E Plast+ (FC) EF"
Finishing Rough Surface of RCC wall with "Shree E Plast+ (FC) EF"
Advantages
High Compressive Strength than other finishing material hence it can be use for repairing higher grade concrete subtrates/ Members.
Non Shrink age Property avoids the crack.
Hydrophobic property avoids water penetration through the finishing coat hence its water proof hence no need to provide additional treatment over the coat of "Shree E Plast +(FC) EF".
Only need to add water at site in "Shree E Plast +(FC) EF" as per water powder ratio hence its easy to use and Quality can control at any Location.
For Finishing & levelling work on A.A.C. block Surface, R.C.C, Ceiling, Mivan Surface, Basement retaining walls surface "Shree E Plast+ (FC) EF" can be applied smoothly and Speedily it Saves lot of time and material hence it save the lot of cost of the project.
No waste during the application.
"Shree E Plast+ (FC) EF" can be applied on any smooth Surface without hacking and without application of bonding agent.
"Shree E Plast+ (FC) EF" can be applied for repairing rough surface of R.C.C, levelling & alignment of beam/ Chajja bottoms in minimum thickness.
Use of "Shree E Plast +(FC) EF" for finishing work saves the material, water required for mixing and Curing as well as it save lot of natural resources hence its Eco friendly Green Building Material.
Pot life of "Shree E Plast +(FC) EF" is more hence mixed material we can be used for finishing work for long time hence it avoid the wastage.
"Shree E Plast +(FC) EF" Contains special grades of Fillers which are free from dust, Silt, Mud hence no formation of the cracks to the finishing material, no effect on Quality & Strength.
Finishing with "Shree E Plast+ (FC) EF" in minimum thickness will reduce the Cost, Dead weight on the walls, Structures & increase the carpet area compare to convention method/ Other Plasters in case of internal walls.
Any type of Tiles, Stone, Marble, Granites, Italian Marbles, Glass mosaic can be fixed with "Shree E Tile Bond++" on surface finished with "Shree E Plast+ (FC) EF" without hacking & without use of any bonding agents before fixing the tiles above finishing coat.
Use of "Shree E Plast +(FC) EF" Skip the use of Putty on external surface for levelling and finishing on R.C.C Surface before Painting, directly paint can be applied on finishing Coat.
Use of finishing coats save the cost of Water proofing, additional levelling by Putty and other finishing material.
Incase of use of finish Coat in colour with special properties it skips all expenses required for surface preparation, Water Proofing, Painting.
Applications
Technical details
To Know More About Technical Specification In Detail
How To Use
Before application of "Shree E Plast +(FC) EF", Surface shall be inspected. Clean the surface with wire brush in case of uneven surface grind the surface of R.C.C by grinder to match the level (as per site requirement) as well as to minimize the use of "Shree E Plast+(FC) EF" to match the level, Remove the dust particles, Clean the surface with the help of blower, remove all, loose materials, If plenty of water are available then use water by pressure to clean and wash the surfaces, or moisten the surface before starting application of "Shree E Plast +(FC) EF".
Add 1 Kg "Shree E Plast +(FC) EF" powder in 230 to 245 ML clean water, Mix the material with mechanical mixer for 3 to 5 minutes or In case of manual mixing Add 1 Kg "Shree E Plast+(FC) EF" powder in 235 to 250 ML clean water, mixed material for 8 to 10 minutes till we get uniform, homogenous mix with uniform consistency for easy & Smooth application, Leave the mix material for 3 to 5 minutes idle to dissolve the Polymers ,adhesives, Fibers to gain the special properties, remix the mixed material for 2 to 3 minutes.
start application on the A.A.C Block/ R.C.C surface/ Mivan Shuttering surface by using proper tools till we get level, uniform & Smooth surface, as required to us or sand face /decorate finish can be created by using appropriate tools .In case of normal weather condition, Curing shall be done twice in a day after 12 hours at least 2 to 3 days.In case of hot or Extreme hot weather curing shall be done for 5 to 6 days. Qty of ; "Shree E Plast +(FC) EF" shall be mixed in such way that it shall be consumed within 1 to 2 hours from the time of mixing.
In case of manual mixing hand gloves shall be used.
Shree E - Plast FC+ contains non-toxic materials. In case of contact with body, eye & face wash it with sufficient water
Unloading and Storage
Do Not Use Hook
Do not use hook for unloading, shifting of bags, material
Loaded Above Ground Level
It shall be unloaded on uniform level platform surface above ground level with proper stacking in countable manner
Store In Dry Place
It should be stored in covered dry place.In case of rainy season it shall be stored in closed store room by covering it by tarpaulin / polythene sheet to protect the bags from dampness / humidity in the atmosphere.
